Full body harnesses are designed to arrest a fall while simultaneously distributing the tremendous shock or load to the worker’s body.
There are many applications and conditions in which full body harnesses must be worn. In order to maximize effectiveness and minimize injury, it is critical that an appropriate body harness be selected based on the job for which it is intended. PeakWorks offers a full range of body harnesses for almost every application.
Full body harnesses must be fitted and tightened properly to ensure maximum protection and to minimize injury.
Waist or restraint belts are not replacements for full body harnesses.
All PeakWorks full body harnesses are built to meet or exceed the highest standards while providing maximum fit and comfort.
Full body harnesses come in many styles with a variety of attachment points (D-rings). The placement of these rings is critical to the type of application and positioning of the worker when performing a job.
The fall protection industry and regulatory committees have standardized the positioning of these attachment rings into Harness Classes A, D, E, L, P.
Depending on the application, full body harnesses may require more than one attachment class in order to correctly position the body and stress points during a fall, i.e. AE, AL, AP.
All full body harnesses come with a standard Class A D-ring (located at the back between the shoulder blades).
Certified to both CSA Z259.10 and ANSI Z359 standards
High visibility colour
Fully adjustable for a universal fit
5 points of adjustment ensure a good fit (2 leg, 2 torso, 1 chest)
Pass-Thru leg and chest buckles for quick donning
Grommeted leg straps available
Sub-pelvic strap for added safety and support
Polyester webbing
Fall indicator for easier inspection before use
Large back D-ring for easy connection
Available in a variety of classes: A, AP, AL, AE
Meets or exceeds all applicable OSHA standards
400 lb (180 kg) capacity (combined weight of person, tools, clothing, etc.)
Product Weight (lb/kg)
2.5 lbs (1.1 kg)
Certified
CSA Z259.10 (Class A) and ANSI Z359
Buckles - Chest
Pass-Thru
Buckles - Leg
Pass-Thru
Buckles - Torso
Friction
D-Rings
Back (1)
Size
Universal
E-mail to a friend
PeakWorks - CONTRACTOR HARNESS - 1D - CLASS A - PASS-THRU BUCKLES
